283
11.5 Emulation
Number of punch holes 70 - 167 [0] (Default): 2 holes
[1]: 3 holes
[2]: 4 holes
Char. Code 71 - - [0] (Default): JIS
[1]: ShiftJIS
Specification text
example of binary data
(entering command in
hexadecimal)
72 - - [0] (Default): OFF
[1]: &$%$
[2]: $?!#
0 Style 73 - - [0] (Default value): 0
[1]:
HexDump - 214 - [0] (Default): OFF
[1]: ON
Print as Gray - 215 [0] (Default): OFF
[1]: ON
End of line processing - 218 - [0] (Default): OFF
[1]: Add LF to end
[2]: Add CR to beginning
[3]: CR-××
“CR-××” adds a line feed to the end in the case of a carriage
return, and adds a carriage return to the beginning in case
of a line feed and form feed.
Default of user-defined
paper size
-219
(Short
Edge
Feed)
- [0] to [9999] (Default: 2100): 0 to 999.9 mm
-220
(Long
Edge)
- [0] to [9999] (Default: 2970): 0 to 999.9 mm
Effective output
quantity
74 221 115 [0] (Default: HP-GL/2): Protocol specification
[1]: Panel
[2]: (Default: ESC/P, PCL): Command
Barcode Mode 75 - - [0] (Default): Normal mode
[1]: Barcode Mode
If Barcode Mode is configured, a barcode outline is printed
clearly.
Target machine - - 169 [0] (Default): HP750C
[1]: FX4036
Pen width - - 800 to
815
The item number of No. 00 is 800.
[0] to [255] (Default:3): 0 to 25.5 mm
Setting Item No. Setting value
ESC PCL HP
To Next Page
Need help?
General
