System
111
Printer Configuration Web Tool
7
Measurements
Units
Allows you to select a unit of measurement displayed on the screen from [Millimeters]
or [Inches].
Paper Size Preference
Allows you to select the unit of default paper size to be used for printer settings.
To use the A4 size paper for the following printer settings by default and to set the
[Units] setting to [Millimeters], select [Metric].
To use the Letter size paper for the following printer settings by default and to set the
[Units] setting to [Inches], select [Inch].
Default paper size for printing
Default custom paper sizes displayed on the screen for each paper tray
Default paper size of each paper tray and the bypass tray
Sounds
Allows you to configure the sound settings of the printer.
Select an event, and use the slider bar to set the volume of the sound.
Enable Sounds
Select this to have the printer sound.
Touch
Sounds when you touch an item on a screen displayed on the touch screen correctly.
Job Completion
Sounds when a job is completed successfully.
Log In
Sounds when you log in to the printer.
Error/Fault
Sounds when a job fails or an error occurs.
Power
Sounds when the printer is ready for operation, or is powered on.
To Next Page
Loading...
Need help?
General