FujiFilm CX 3240 - System; Power Saver

Printer Configuration Web Tool
98
Printer Configuration Web Tool
7
System
Date & Time
Set the date and time for the system clock of the printer. The date and time set here
will be printed on all lists and reports.
Date
 Date Format
Select a date format.

[Year/Month/Day]

[Month/Day/Year]

[Day/Month/Year]
 Date
Enter the today's date. You can use the calendar to specify the date.
Time
Select [12-Hour Clock] or [24-Hour Clock] for the time format.
 AM/PM
When selecting [12-Hour Clock] for [Time], select [AM] or [PM].
 Time
Enter the current time.
 Time Zone
Select a time zone.
 Daylight Savings Time
You can set daylight saving time. During daylight saving time period, the printer moves
the clock forward by one hour.
SNTP Settings
Select [Edit] to confirm or change the settings.
See "SNTP" (P.93).
Power Saver
Power Saving
The Power Saver mode has two modes: the Low Power and Sleep modes. When a
specified period of time has elapsed, the printer switches to these modes in the
following order to reduce power consumption.
Last operation on the printer  Low Power mode  Sleep mode
Note

For [Low Power Timeout] and [Sleep Timeout], you can enter values of up to 60 minutes in total.