Permissions
97
Printer Configuration Web Tool
7
Advanced Settings
Input Settings
Authentication Settings
Password Rules
Minimum Length
Set this item when you specify the minimum number of digits allowed for registering a
passcode.
Set a value from 1 to 63 in 1 digit increments.
Maximum Length
Set this item when you specify the maximum number of digits allowed for registering a
passcode.
Set a value from 1 to 63 in 1 digit increments.
Password Contains User Name
Select whether or not to allow a password which contains the user name.
Password Complexity
You can select if passwords must include a number or a non-alphanumeric character.
Item Description
Case Sensitive User Name Select whether or not to ignore the case for log-in user name.
Item Description
Log Failed Login Attempts Set the failure count to detect unauthorized access. An error is
logged if authentication fails the number of times specified in
[Failed Login Attempt Limit] within a predetermined time (10
minutes).
Limit Login Attempts of
System Administrator
This feature protects the settings from being changed by
someone impersonating your system administrator. If
authentication for a system administrator's ID fails more than
specified times continuously, access is denied.
You can specify a login attempt count from 1 to 10.
The failure count is reset when the printer is restarted.
To cancel the access rejection state, restart the printer by
switching off and on the power.
To Next Page
Loading...
Need help?
General