Safety Notes
15
Before Using the Printer
1
Safety Notes
Please read the following instructions carefully before operating the machine and refer
to them as needed to ensure the continued safe operation of your machine.
Your FUJIFILM product and supplies have been designed and tested to meet strict
safety requirements. These include safety agency evaluation and certification, and
compliance with electromagnetic regulations and established environmental
standards.
The safety and environment testing and performance of this product have been
verified using FUJIFILM materials only.
WARNING: Unauthorized alterations, which may include the addition of new
functions or connection of external devices, may impact the product
certification. Please contact your local dealer for more information.
This product and recommended supplies have been tested and found to comply with
strict safety requirements including safety agency approvals and compliance with
environmental standards. Follow the following instructions for safety use.
WARNING: Any unauthorized alteration including an addition of new functions
or connection to external devices may not be covered by the product warranty.
Contact your local dealer for more information
.
Electrical Safety
This product shall be operated by the power source as indicated on the product’s data
plate. Consult your local power company to check if your power source meets the
requirements.
Electrical Supply
WARNING: Connect this product to a protective earth circuit.
This product is supplied with a plug that has a protective earth pin. The plug fits only
into an earthed electrical outlet. This is a safety feature. If the plug doesn’t fit to the
outlet, contact an electrician to replace the outlet to avoid risk of electric shock.
Never use an earthed adapter plug to connect the product to the electrical outlet that
has no earth connection terminal.
Improper connection of a grounding conductor may cause electric shock.
Warning Markings
All warnings and instructions marked on or supplied with the product should be followed.
WARNING/CAUTION This symbol alerts users to areas of the equipment
where there is the possibility of personal injury.
WARNING This symbol alerts users to areas of the equipment
where there are heated or hot surfaces, which should
not be touched.
INSTRUCTION This symbol alerts users to areas of the equipment
which require special attention to avoid the possibility
of personal injury or damage to the equipment.
To Next Page
Loading...
Need help?
General