Maintenance
150
Maintenance
10
3 Touch [Start].
4 At the successfully completed prompt, touch [Close].
5 To exit the menu, touch [X].
6 Press the Home button.
Fusing Unit Speed Adjustment
You can adjust fusing speed to prevent occurrence of smearing.
Depending on the printer settings, you may need to log in as the system administrator.
1 Press the Home button.
2 Touch [Device] > [Support] > [Fusing Unit Speed Adjustment].
3 Touch [Paper Supply] to select a tray to adjust.
4 To increase or decrease the fusing speed, touch the Plus icon (+) or the Minus icon (-),
then touch [Adjust].
5 To adjust the fusing unit speed for another paper tray, select it from the list, then repeat
steps 3 and 4.
6 To exit the menu, touch [X].
7 Press the [Home] button.
Performing a Transfer Belt Cleaning Mode Procedure
Debris on the transfer belt can cause vertical black or color-streaks and lines to appear
on prints. To remove black or color-streaks and lines on prints, use the Belt Cleaning
Mode procedure.
Depending on the printer settings, you may need to log in as the system administrator.
1 At the printer touch screen, press the [Home] button.
2 Touch [Device] > [Support] > [Belt Cleaning Mode].
3 To perform a Belt Cleaning Mode procedure, touch [Start].
4 At the successfully completed prompt, touch [Close].
5 To exit the menu, touch [X].
6 Press the [Home] button.
To Next Page
Loading...
Need help?
General