SETTINGS
K0553 Revision D 60 [EN] English
Configuration
The Unit Configuration ( 2 Channel, 3 Channel or 4 Channel modes) can be changed by selecting
the appropriate radio button in the right hand menu.
Note that this menu option is only active when the unit is switched to Standby mode.
Regional settings
Opens a sub-menu containing four items:
- Date
To change the date setting:
1) Tap the date panel. The current setting is displayed.
2) On the displayed calender, select the required “Day”, “Month” and “Year”.
3) Tap the “Tick” icon, the calender closes and the new date is displayed in the date panel.
4) Taping the “Cross” icon cancels the action and closes the calender.
- Date format
Shows the current format. To change the date format:
1) Tap the date format panel.
2) Tap the required date format radio button. The date format radio button panel closes and
the date format panel shows the selected format.
- Time
To change the time setting:
1) Tap the time panel. The current setting is displayed.
2) On the displayed panel, select the required “hours”, “minutes” and “seconds”
3) Tap the “Tick” icon, the time panel closes and the new time is displayed in the time panel.
4) Taping the “Cross” icon, cancels the action and closes the time panel.
- Time format
Shows the current format. To change the time format:
1) Tap the time format panel.
2) Tap the required time format radio button. The time format radio button panel closes and
the time format panel shows the selected format.
To Next Page
Loading...
Need help?
General
