GE ADTS542F User Manual

GO TO GROUND
K0553 Revision D 74 [EN] English
Figure 3-23: Aircraft Going to Ground - Multiple Channel
5) To request all channels to temporarily hold at the current controlled pressure, touch the
green "hand" icon (5). The controller status bar will change from CONTROL to HOLD and the
“Hand” will turn orange. This action will also hold a descent to ground. The HOLD state may
be released either by again touching the orange "hand" icon or by returning to MEASURE
mode. The “hand” will turn green to indicate hold is released.

GE ADTS542F Specifications

General

Brand	GE
Model	ADTS542F
Category	Test Equipment
Language	English