GE Ultrasonic USM Go User Manual

Chapter 1. General Information
USM Go Operator’s Manual 15
1.5.3 Connecting the USB Port
The connector closest to the hinge of the top compartment cover (see Figure 5 on page 13) is a Micro USB port. If you use a standard USB
cable to connect the USM Go to a PC (no special drivers are required), the installed SD card will be added to the list of active drives on the
PC. You can then perform all normal drive activities, such as copying and deleting files, on the USM Go SD card.
Important: While the USM Go is connected to a PC via the USB port, the instrument will not accept any user input from the keypad.
Normal operation resumes as soon as the USB cable is disconnected.

GE Ultrasonic USM Go Specifications

General

Brand	GE
Model	Ultrasonic USM Go
Category	Measuring Instruments
Language	English