GE Ultrasonic USM Go User Manual

Chapter 2. Instrument Setup
USM Go Operator’s Manual 31
2.3.2 Display Appearance
Follow the procedures in this section to adjust the display appearance. The adjustments require access to the CONFIG1 submenu, which is
accessed from the SETUP menu (see Figure 10 on page 23).
2.3.2a Setting the Display Color (SETUP-CONFIG1-COLOR)
1. In the SETUP menu, activate the CONFIG1 submenu using the joystick ( ). Several functions are displayed on the screen.
2. Use the joystick ( ) to select the function titled COLOR, then press the center of the joystick ( ) to activate the function.
There are four preset color schemes.
3. To change the display color scheme, either move the joystick or press the function toggle.
4. After making your choice, press the center of the joystick ( ) to deactivate the function.

GE Ultrasonic USM Go Specifications

General

Brand	GE
Model	Ultrasonic USM Go
Category	Measuring Instruments
Language	English