GE Multilin L60 Line Phase Comparison System 1-1
1 GETTING STARTED 1.1 IMPORTANT PROCEDURES
1
1 GETTING STARTED 1.1IMPORTANT PROCEDURES
Please read this chapter to help guide you through the initial setup of your new relay.
1.1.1 CAUTIONS AND WARNINGS
Before attempting to install or use the relay, it is imperative that all WARNINGS and CAUTIONS
in this manual are reviewed to help prevent personal injury, equipment damage, and/or down-
time.
1.1.2 INSPECTION CHECKLIST
• Open the relay packaging and inspect the unit for physical damage.
• View the rear nameplate and verify that the correct model has been ordered.
Figure 1–1: REAR NAMEPLATE (EXAMPLE)
• Ensure that the following items are included:
• Instruction manual
• GE EnerVista CD (includes the EnerVista UR Setup software and manuals in PDF format)
• mounting screws
• For product information, instruction manual updates, and the latest software updates, please visit the GE Multilin web-
site at http://www.GEmultilin.com
.
If there is any noticeable physical damage, or any of the contents listed are missing, please contact GE
Multilin immediately.
GE MULTILIN CONTACT INFORMATION AND CALL CENTER FOR PRODUCT SUPPORT:
GE Multilin
215 Anderson Avenue
Markham, Ontario
Canada L6E 1B3
TELEPHONE: (905) 294-6222, 1-800-547-8629 (North America only)
FAX: (905) 201-2098
E-MAIL: gemultilin@ge.com
HOME PAGE: http://www.GEmultilin.com
®
®
Technical Support:
Tel: (905) 294-6222
Fax: (905) 201-2098
http://www.GEmultilin.com
Model:
Mods:
Wiring Diagram:
Inst. Manual:
Serial Number:
Firmware:
Mfg. Date:
L60G00HCHF8AH6AM6BP8BX7A
000
831708BC
GEK-113275
MAZB98000029
D
2005/01/05
Control Power:
Contact Inputs:
Contact Outputs:
88-300V DC @ 35W / 77-265V AC @ 35VA
300V DC Max 10mA
Standard Pilot Duty / 250V AC 7.5A
360V A Resistive / 125V DC Break
4A @ L/R = 40mS / 300W
RATINGS:
L60
Line Phase Comparison Relay
GE Multilin
Made in
Canada
- M A A B 9 7 0 0 0 0 9 9 -
831794A1.CDR
To Next Page
Loading...
Need help?
General
