GE Voluson P8 Service Manual

GE DRAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
Chapter 3 - Setup Instructions 3-25
3-6-2 Power On / Boot Up
3-6-2-1 Ultrasound unit Power On
1.) Connect the Main Power Cable to the back of the system.
2.) Connect the Main Power Cable to a hospital grade power outlet with the proper rated voltage.
Never use an adapter that would defeat the safety ground.
3.) Switch ON the Circuit at the rear of the system.
Figure 3-13 Circuit and main power cable at rear of system
Circuit
Main Power

GE Voluson P8 Specifications

General

Brand	GE
Model	Voluson P8
Category	Medical Equipment
Language	English