6 - Maintenance
100
Greasing the Pump
Grease the pump as follows:
• Factory greased:
300 g grease into each lubrication point (A).
• Normal operation:
Greasing every 50 hours with 30 grams of grease into each
lubrication point (A). See also the section“50 Hours Service”
in this book.
• After disassembling the pump (diaphragm renewal, etc.):
Greasing with 200 grams of grease into each lubrication
point (A).
μ
ATTENTION! In order to prevent excessive wear, it is important to
use a recommended lubricant! See the section “Recommended
Lubricants” in this book.
μ
ATTENTION! When greasing the pump MUST be stopped!
To Next Page
Loading...
Need help?
General
