EasyManuals Logo
Home>Hardi>Farm Equipment>MASTER plus HYS

Hardi MASTER plus HYS User Manual

Hardi MASTER plus HYS
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
5 - Operation
81
Filling/Washing Location Requirements
When filling the sprayer with chemicals and water, it is important to avoid spot contamination by spraying chemicals in
order to protect the subsoil water resources.
Dedicated Filling Site
If the sprayer is always filled on the same location, a special filling/washing location should be established. This should have
a hard, liquid-impenetrable surface (e.g. concrete) securing against seepage, together with edges securing against run-off
to the surrounding areas. The location should be drained to an adequate receptacle (e.g. slurry tank or similar).
Any spillage or washings should be retained and diluted in order to be distributed in a larger area. This is to ensure minimal
environmental impact and avoid build-up of larger chemical concentrations at one spot.
If no other requirements of distances exist, the following general recommendation of distance can be used. Filling location
must be no closer than:
1. 50 metres from public water supplies for drinking purposes.
2. 25 metres from non-public water supplies for drinking purposes and from treatment sumps and cesspools of drainage
systems.
3. 50 metres from surface water (watercourses, lakes and coastal waters) and from nature reserves.
In the Field
Alternatively the sprayer can be filled in the field, where the spraying is to take place. If so, choose a different location for
each refilling.
If no other requirements of distances exist, the filling should not take place closer than:
1. 300 metres from public or non-public water supplies for drinking purposes.
2. 50 metres from surface water (watercourses, lakes and coastal waters), treatment sumps, cesspools of drainage
systems, and nature reserves.
μ
ATTENTION! Legislation and requirements vary from country to country. Always follow local legislation in force.
μ
ATTENTION! It is the responsibility of the sprayer owner/operator to comply with all relevant legislation. HARDI cannot
undertake any responsibilities for incorrect operation and use.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hardi MASTER plus HYS and is the answer not in the manual?

Hardi MASTER plus HYS Specifications

General IconGeneral
BrandHardi
ModelMASTER plus HYS
CategoryFarm Equipment
LanguageEnglish

Related product manuals