3 - Description
47
Identification Plates
An identification plate indicating data for the sprayer is fitted on the
steel frame near the front of the sprayer on the right-hand side.
The identification number for the sprayer is also punched into the steel
frame near the ID plate.
The example to the right is the international model of the ID plate.
If the sprayer is sold to a market requiring another language, the ID plate
text might be different. The standard types of ID plates belonging to
sprayers sold to the equivalent markets are shown below.
ID Plate Data
No. Field name Description
1 Identification No. Coded number identifying the machine. Includes manufacturer, production year, type and ends with a continuous serial number.
The identification number uniquely identifies one specific sprayer amongst the lot.
2 Make Manufacturer or brand name. The HARDI group currently have two makes: HARDI and EVRARD.
3 Model A particular design within a sprayer type.
E.g. type of sprayer models are NK, MASTER, METEOR etc.
4 Not used Reserved for future use.
5 Type Defined type – related to type approvals definition: A grouping based on shared characteristics.
E.g. lift sprayer, trailer sprayer, mist blower, field sprayer, self-propelled sprayer etc.
In homologation and type approval context, the “Type” refers to the particular form and shape of a chassis (i.e. the chassis drawing
number). Can be stated encoded.
6 Production year Year of production start.
In all factories and markets in the EU, the production year is stated in clear text separately. In other regions, “1521” means “produced
in week 52 of the year 2011” etc.
7 Capacity Rated or nominal content of the MainTank. (The tank is oversized to retain overfilling, foam etc.)
8 Tare mass Same as unladen weight. Vehicle net weight without load, but with fuel, driver etc. Typically the heaviest configuration is stated
for all variants (most vehicles are lighter than the stated tare mass).
9 Model year Year of shipment from factory.
-1-
-2-
-3-
-4-
-5-
-6-
-7-
-8-
Herthadalvej 10 - 4840 Nørre Alslev - Denmark
Capacity, Gal
Issue
Type
Empty wt. lbs.
Make
Model
Made in USA
97831000
HARDI NORTH AMERICA Inc.
1500 West 76th St. - Davenport, Iowa 52806 - USA.
www.hardi-us.com
Identification No.
-1-
-2-
-3-
-4-
-5-
-6-
-7-
-8-
Год выпуска
97831100 -
Сделано в России
Год выпуска модели
Сделано в России по технологии HARDI
OOO “EMC”
Серийный проезд 5 - 400075 Волгоград - Россия
www.hardi.ru
Изготовлен
Модель
Идентификационный №
Тип
Емкость, л
Общая масса, кг
-1-
-2-
-3-
-4-
-5-
-6-
-7-
-8-
-9-
To Next Page
Loading...
Need help?
General
