5 - Operation
83
Filling the RinseTanks
If one or two RinseTanks are fitted to the sprayer, they are filled via the lid
on the top of the tanks:
1. Remove the filler lid of the tank to be filled.
2. Fill water into the tank. Keep an eye on the tank opening in order
not to overfill the tank.
3. Stop filling and refit the lid.
Volume: approximately 80 litres each.
μ
ATTENTION! Only fill the RinseTank(s) with clean water! To avoid
algae developing in the tanks. Always drain the RinseTank(s), if the
sprayer is not in use for a longer period of time.
Filling the CleanWaterTank
To fill the CleanWaterTank:
1. Remove the tank lid.
2. Fill with clean water.
3. Refit the tank lid.
For use of water:
• Turn the lever to open the ball valve (arrow).
The water from this tank is for hand washing, cleaning of clogged
nozzles etc.
±
WARNING! Although the CleanWaterTank is only filled with clean
water, this water must NOT be used for drinking.
μ
ATTENTION! Only fill the CleanWaterTank with clean water! To
avoid algae developing in the tank. Always drain the
CleanWaterTank, if the sprayer is not in use for a longer period of
time.
To Next Page
Loading...
Need help?
General
