EasyManuals Logo
Home>Hardi>Farm Equipment>MASTER plus HYS

Hardi MASTER plus HYS User Manual

Hardi MASTER plus HYS
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
4 - Sprayer Setup
60
Tractor Suitability
General Info
Before connecting the sprayer to your tractor, you must check the suitability of the tractor. Only connect a tractor which is
suitable for the purpose.
Perform a brake test to check whether the tractor achieves the required braking rate with the sprayer connected.
DANGER! An unsuitable tractor, or improper use of the tractor, causes a risk of:
Insufficient tractor stability, steering and braking power.
Severe or fatal injuries.
The sprayer or tractor being damaged during operation.
Requirements for the suitability of a tractor are, in particular:
Permissible total weight.
Permissible approved axle loads.
Load capacity of the tyres fitted.
Approved front weights must be sufficient.
You can find this data on the rating plate of the tractor or in the tractors instruction manual or documentation. Ask your
tractor dealer if in doubt.
The front axle of the tractor must always be subjected to at least 20% of the total weight of the vehicle.
The tractor must achieve the braking rate specified by the tractor manufacturer, even with the sprayer connected.
Calculating Actual Weights and Loads
The permissible total tractor weight, specified in the tractor documentation, must be greater than the sum of the:
Tractor’s tare weight.
Tractors ballast and weights.
Sprayers total weight.
FrontTank´s total weight.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hardi MASTER plus HYS and is the answer not in the manual?

Hardi MASTER plus HYS Specifications

General IconGeneral
BrandHardi
ModelMASTER plus HYS
CategoryFarm Equipment
LanguageEnglish

Related product manuals