116 Programming: Fundamentals, File Management
3.2 Creating and writing programs
Saving a program to a new file
If desired, you can save the contents of the currently active program
under a different program name. Proceed as follows:
Select the soft-key row with the saving functions
Press the SAVE AS soft key: The TNC opens a window in which you
can enter the directory and the new file name
Enter the file name and confirm with the OK soft key or the ENT key,
or press the CANCEL soft key to abort
Undoing changes
If desired, you can undo all changes made since the last time you
saved the program. Proceed as follows:
Select the soft-key row with the saving functions
Press the CANCEL CHANGE soft key: The TNC opens a window in
which you can confirm or cancel this action
Press the YES soft key or the ENT key to discard the changes made.
Abort with the NO soft key
Editing and inserting words
Select a word in a block and overwrite it with the new one. The plain-
language dialog is available while the word is highlighted
To accept the change, press the END key
If you want to insert a word, press the horizontal arrow key repeatedly
until the desired dialog appears. You can then enter the desired value.
To Next Page
Loading...
Need help?
General
