HIKVISION PanoVu Series User Manual

Stop patroling.
Delete the patrol.
Set the patrol.
Note
You can delete all patrols in Conguraon → PTZ → Clear Cong . Click Clear All Patrols, and
click Save.
4.3.1 Set One-Touch Patrol
The device automacally adds presets to one patrol path and starts patrol scan.
Steps
1. Set two or more presets among preset No.1 to preset No.32. For
seng presets, refer to Set
Preset .
The device will automacally add presets to patrol path No.8.
2. Choose one of the following methods to enable the funcon.
-
Click .
-
Call patrol path No.8.
-
Select and call preset No.45.
4.4 Set
Paern Scan
The device can move as the recorded paern.
Steps
1. Click
to show the PTZ control panel, and click .
2. Select one paern scan path that needs to be set.
3. Click
to start recording paern scan.
4. Click PTZ control buons as demands.
Note
Recording stops when the space for paern scan is 0%.
5. Click to complete one paern scan path sengs.
6. Click to call paern scan.
Stop
paern scan.
Reset paern scan path.
Delete the selected paern scan.
Stched PanoVu Camera with PTZ User Manual
22

HIKVISION PanoVu Series Specifications

General

Brand	HIKVISION
Model	PanoVu Series
Category	Security Camera
Language	English