HIKVISION PanoVu Series User Manual

9. Set arming schedule. See Set Arming Schedule .
10. Set linkage method. See Linkage Method
Sengs .
8.3 Smart Event (Panoramic Channel)
This part introduces the smart event conguraon in the panoramic channel (Camera 02 and
Camera 03).
Note
• You need to enable the smart event
funcon of Camera 02 or Camera 03 on VCA Resource page
rst to show the funcon conguraon page.
• Camera 03 may not be supported by some device models.
8.3.1 Set Smart Event Rules
Line crossing detecon, intrusion detecon, region entrance detecon, and region exing
detecon are available. Rules for each detecon and the detecon priority should be set
separately.
Set Intrusion
Detecon
Intrusion detecon detects the object movement of entering and loitering in a predened area.
When intrusion occurs, the device takes linkage acons as response.
Steps
1. Go to
Conguraon → Event → Smart Event → Intrusion Detecon .
2. Select a device channel.
Note
Only panoramic channels support the funcon.
3. Check Enable.
4. Draw
detecon area.
1) Select a Region No.. Up to 4 regions can be set.
2) Click
Detecon Area.
3) Click on the live image to draw the boundaries of the detecon area, and right click to
complete drawing.
5. Set
detecon parameters.
Detecon Target
You can specify the object type, and the device only detects the selected type of objects.
Sensivity
Stched PanoVu Camera with PTZ User Manual
71

HIKVISION PanoVu Series Specifications

General

Brand	HIKVISION
Model	PanoVu Series
Category	Security Camera
Language	English