Holden Trailblazer Owner Manual (Australia-Localizing-Australia-12333016) -
2019 - crc - 3/2/18
118
The destination symbol marks the
final destination after a route has
been planned.
The waypoint symbol marks one or
more set waypoints.
A waypoint is a stopover destination
point added to the planned route.
The estimated time to the
destination displays. Touch the
Arrival button to toggle to duration
and to the distance of the
destination.
This symbol indicates the
recommended manoeuver that
should be performed. Touch it to
display the turn list or waypoint list.
The No GPS symbol appears when
there is no Global Positioning
System (GPS) satellite signal. When
the GPS is gone, the vehicle
position on the map may not be
accurate.
Autozoom
As a manoeuver is being
approached, the map automatically
zooms in to give greater detail.
If lane guidance is available for the
manoeuver, this is also shown.
When the system begins to
autozoom, it zooms in to its
minimum level. After the manoeuver
is performed, the system slowly
zooms back out.
Destination
If route guidance is not active, touch
the NAV screen button on the Home
Page to access the map view.
Touch the Destination icon from the
map view to enter a destination.
Available methods of entering a
destination are Address, Recent
Destinations, Contacts, Crossroads
and POIs. Several options can be
selected to plan a route. Some
destination items may be greyed out
if no destination was previously
entered or saved.
Touch the DESTINATION button to
go to the destination entry views.
Infotainment System - MyLink with Built-in Navigation
To Next Page
Loading...
Need help?
General
