Holden Trailblazer Owner Manual (Australia-Localizing-Australia-12333016) -
2019 - crc - 3/2/18
Seats and Restraints 45
Warning (Continue d)
or prevent the seat belt assembly
from being adjusted to remove
slack.
The belts lock during heavy
acceleration or deceleration for
the safety of the occupants.
Note
Make sure that the belts are neither
damaged by shoes or sharp-edged
objects or trapped. Prevent dirt from
getting into the belt retractors.
Belt Force Limiters
On front seat three point belts,
stress on the body is reduced by the
gradual release of the belt during a
collision.
Belt Tensioners
In the event of a front, side or rear
collision of a certain severity, the
driver's and/or front passenger's
three point seat belts are tightened.
{
Warning
Incorrect handling (e.g. removal
or fitting of belts or belt buckles)
can deploy the belt tensioners
with risk of injury.
.
When the belt tensioners have
been deployed,
9 illuminates on
the instrument panel. See Seat
Belt Reminders 0 76.
.
Deployed belt tensioners must
be replaced.
.
Belt tensioners are only
triggered once.
{
Warning
Do not attach or install objects
that may interfere with the
operation of the belt tensioners.
Do not make any modifications to
belt tensioner components.
Three-Point Seat Belt
Fitting
Withdraw the belt from the reel,
guide it untwisted across the body
and push the latch plate into the
buckle until it clicks. Tension the lap
belt regularly while driving by
tugging the shoulder belt.
To Next Page
Loading...
Need help?
General
