Holden Trailblazer Owner Manual (Australia-Localizing-Australia-12333016) -
2019 - crc - 3/2/18
Driving and Operating 219
The RVC cannot display objects:
.
Close to the corners of the
bumper.
.
Forward of the camera.
.
Higher than the camera.
RVC Display
The camera image appears on the
infotainment system display when
reverse gear is selected.
The area directly behind the vehicle
is displayed in real time.
Note
.
The distance of objects seen on
the screen differs from the actual
distance.
.
The area displayed on the
screen may vary according to
vehicle orientation or road
conditions.
.
Objects of different heights will
appear to be different distances
from the vehicle.
.
The display brightness
automatically adjusts to suit
ambient lighting conditions.
.
Guidelines to assist reversing
are also displayed. This can be
changed, see Settings 0 141 or
Settings 0 175.
Operating the RVC
To activate:
1. Turn the ignition key to ON.
2. Select reverse gear.
The camera and display
automatically activates.
Note
When the shift lever is moved to
another position, the RVC
deactivates.
Cleaning
The lens requires regular cleaning
to ensure optimum performance.
Use only a soft cloth, mild soap and
water.
{
Danger
Do not use abrasive cleaners or
scouring pads as they could
scratch the lens, impairing the
systems performance.
Lane Departure
Warning (LDW)
If equipped, LDW may help avoid
crashes due to unintentional lane
departures. It may provide an alert if
the vehicle is crossing a lane
without using a turn signal in that
To Next Page
Loading...
Need help?
General
