Holden Trailblazer Owner Manual (Australia-Localizing-Australia-12333016) -
2019 - crc - 3/2/18
236 Vehicle Care
Engine Oil
Checking Oil Level
.
Check the engine oil level
regularly and before a long
journey.
.
Maintain the correct level.
.
The engine must be at operating
temperature and the ignition
turned off for at least 10 minutes.
1. Park the vehicle on a level
surface.
2. Remove the dipstick and wipe
clean.
3. Insert the dipstick to the stop
on the handle.
4. Remove and read the engine
oil level.
The level should be at the MAX
mark. Add oil if the level is at
the MIN mark.
5. Insert the dipstick to the stop
on the handle.
Note
The engine oil level must not
exceed the MAX mark on the
dipstick.
For correct engine oil specification,
see Recommended Fluids and
Lubricants 0 281.
Adding Engine Oil
See Capacities and Specifications
0 288.
The engine oil filler cap is located
on the top of the engine.
1. Rotate the engine oil filler cap
anticlockwise and remove.
2. Add enough oil to reach below
the MAX mark on the dipstick.
3. Check the level on the dipstick
and add further oil if necessary.
The engine oil must not exceed
the MAX mark on the dipstick.
Caution
Overfilled engine oil must be
drained or suctioned out.
To Next Page
Loading...
Need help?
General
