Holden Trailblazer Owner Manual (Australia-Localizing-Australia-12333016) -
2019 - crc - 3/2/18
Lighting 95
The DRL operate in high intensity in
the following conditions:
.
The ignition is in the ON/RUN
position.
.
The exterior lamp control is in
the AUTO position.
.
The engine is running and the
shift lever is not in P.
Headlamp Levelling
Control
To set the headlamp level according
to vehicle load, turn the dial to the
required position.
0 or 1 : One person in the driver´s
seat, or both front seats occupied (2
passengers).
2 : Front seats and all seats furthest
to the rear occupied (5 passengers),
or all seats occupied (7
passengers).
3 : All seats occupied plus load
compartment full with the
permissible load on the rear axle,
or one person in the driver's seat,
plus load compartment full with the
permissible load on the rear axle.
Hazard Warning Flashers
Operated with the | button.
Press again to turn the flashers off.
The hazard warning flashers will
activate automatically if the airbags
deploy.
Turn and Lane-Change
Signals
Push the lever in the direction the
steering wheel is turned.
To Next Page
Loading...
Need help?
General
