Holden Trailblazer Owner Manual (Australia-Localizing-Australia-12333016) -
2019 - crc - 3/2/18
94 Lighting
2 : Headlamps on.
When the exterior lamps are on,
;
illuminates in the instrument cluster.
See Lamps On Reminder 0 82.
Automatic Light Control
When the exterior lamp control
switch is set to AUTO, the system
automatically turns the headlamps
and tail lamps on, depending on the
exterior illumination conditions.
This function operates with a short
delay depending upon the ambient
lighting conditions.
If the windscreen wipers operate
eight continuous cycles when it is
dark outside, the exterior lamps
illuminate automatically.
Headlamp High/
Low-Beam Changer
To switch from low to high beam,
push the lever.
To switch to low beam, pull the
lever.
{
Warning
Always switch the high beam
headlamps to low beam when you
approach oncoming or other
vehicles ahead. High beam
headlamps can temporarily
dazzle other drivers, which could
result in a collision.
Headlamp Flash
To flash the high beam lights, pull
the lever rearwards and release.
The lights stay on for as long as the
lever is held.
Daytime Running
Lamps (DRL)
DRL increase the visibility of the
vehicle during daylight. The LEDs in
the DRL can operate in two different
intensities:
.
Normal intensity for position
(park) lamps.
.
High intensity for DRL function.
To Next Page
Loading...
Need help?
General
