Holden Trailblazer Owner Manual (Australia-Localizing-Australia-12333016) -
2019 - crc - 3/2/18
22 Keys, Doors, and Windows
Replace Battery in Remote Key
may also be displayed in the
instrument cluster when the battery
requires replacing.
Use a CR2032 (or equivalent)
battery.
Caution
Avoid touching the flat surfaces of
the battery, the circuit board and
other components inside the
remote control with bare fingers.
Handling will shorten battery life.
1. Open the cover.
2. Remove the used battery.
3. Install
the new battery.
Place the negative side (-)
down towards
the base.
4. Close the cover.
5. Check the RKE transmitter
operation.
Note
.
Batteries do not belong in
household waste. Dispose of at
an appropriate recycling
collection point.
.
Avoid dropping the RKE
transmitter.
.
Do not place heavy objects on
the RKE transmitter.
.
Keep the RKE transmitter away
from water and direct sunlight.
.
If the RKE transmitter gets wet,
wipe it with a soft cloth.
Memorised Settings
Whenever the ignition is switched
off, the following settings are
automatically memorised by the
remote control unit or the
electronic key.
.
Lighting
.
Infotainment system (If
supported)
.
Central locking system
.
Comfort settings
The saved settings are
automatically used next time the
ignition is switched on with the
memorised key of the remote
control unit or the electronic key.
See Vehicle Personalisation 0 91.
To Next Page
Loading...
Need help?
General
