Honda NT700V Deauville Service Manual

MAINTENANCE
BRAKE
LEVER ADJUSTMENT
Align the allowance
on the brake lever
with the index num-
ber on the adjuster.
The distance between the top of the brake lever and
the grip can be adjusted by turning the adjuster.
BRAKE PEDAL HEIGHT ADJUSTMENT
Loosen the lock nut and turn the push rod as
required.
Tighten the lock nut to the specified torque.
TORQUE: 17.2 N-m (1.8 kgf-m, 1.3 Ibf-ft)
BRAKE LIGHT SWITCH
NOTE:
8 The brake light switch on the front brake master
cylinder cannot be adjusted. If the front brake
light switch actuation and brake engagement are
not synchronized, either replace the switch unit
or the malfunctioning parts of the system.
Make the rear brake light switch adjustments
after the brake pedal height adjustment and the
brake pedal free play adjustment have been
made.
Recheck the brake light switch operation.
ADJUSTING NUT

Honda NT700V Deauville Specifications

General

Displacement	680 cc
Bore x Stroke	81 mm x 66 mm
Compression Ratio	10.0:1
Fuel System	PGM-FI electronic fuel injection
Starter	Electric
Transmission	5-speed
Final Drive	Shaft
Front Tire	120/70 ZR17
Engine Type	Liquid-cooled, 4-stroke, SOHC, 52° V-twin
Max Power	65 hp (48 kW) @ 8000 rpm
Ignition	Computer-controlled digital with electronic advance
Front Suspension	41 mm telescopic fork, 115 mm travel
Rear Suspension	Single shock, Pro-Link swingarm, 120 mm travel
Front Brakes	296 mm dual hydraulic disc
Rear Brakes	276 mm hydraulic disc
Rear Tire	150/70 ZR17
Seat Height	805 mm
Fuel Capacity	19.7 liters
Wheelbase	1, 475 mm (58.1 inches)