Honda NT700V Deauville Service Manual

FRAME/BODY PANELSIEXHAUST SYSTEM
SEAT
Open the left saddle bag using the ignition key.
Pull the lever and unlock the seat, then remove the
seat off.
Install the seat assembly by inserting its prongs
under the raised lip of the frame properly.
SIDE COVERIPIVOT COVER
REMOVAL/INSTALLATION
Be careful not to Remove the seat (page 3-5).
damage the side
Release the bosses on the side cover from the frame
grommets and groove of the middle cowl.
Remove the side coverlpivot cover
by releasing its
fastener from the frame fastener and groove of the
middle cowl.
Install the side cover by inserting its bosses into the
frame grommets and groove of the middle cowl.
SEAT
\
PRONGS \
I
LEVER
GROOVE
\
BOSSES

Honda NT700V Deauville Specifications

General

Displacement	680 cc
Bore x Stroke	81 mm x 66 mm
Compression Ratio	10.0:1
Fuel System	PGM-FI electronic fuel injection
Starter	Electric
Transmission	5-speed
Final Drive	Shaft
Front Tire	120/70 ZR17
Engine Type	Liquid-cooled, 4-stroke, SOHC, 52° V-twin
Max Power	65 hp (48 kW) @ 8000 rpm
Ignition	Computer-controlled digital with electronic advance
Front Suspension	41 mm telescopic fork, 115 mm travel
Rear Suspension	Single shock, Pro-Link swingarm, 120 mm travel
Front Brakes	296 mm dual hydraulic disc
Rear Brakes	276 mm hydraulic disc
Rear Tire	150/70 ZR17
Seat Height	805 mm
Fuel Capacity	19.7 liters
Wheelbase	1, 475 mm (58.1 inches)