Views
LDAP server view
Predefined user roles
network-admin
Parameters
all-level: Specifies that the search goes through all sub-directories of the base DN.
single-level: Specifies that the search goes through only the next lower level of sub-directories under the
base DN.
Examples
# Specify the search scope for the LDAP authentication as all sub-directories of the base DN.
<Sysname> system-view
[Sysname] ldap server ccc
[Sysname-ldap-server-ccc] search-scope all-level
Related commands
• display ldap scheme
• ldap server
server-timeout
Use server-timeout to set the LDAP server timeout period, the maximum time that the device waits for an
LDAP response.
Use undo server-timeout to restore the default.
Syntax
server-timeout time-interval
undo server-timeout
Default
The LDAP server timeout period is 10 seconds.
Views
LDAP server view
Predefined user roles
network-admin
Parameters
time-interval: Specifies the LDAP server timeout period, in the range of 5 to 20 seconds.
Usage guidelines
If you change the LDAP server timeout period, the change is effective only for LDAP authentication that
occurs after your change.
90
To Next Page
Loading...
Need help?
General
