To Next Page

To Previous Page

The source address specified by the sftp client source command applies to all SFTP connections, but the

source address specifies by the sftp command applies only to the current connection.

Examples

# Specify the source IP address for the SFTP client as 192.168.0.1.

<Sysname> system-view

[Sysname] sftp client source ip 192.168.0.1

Related commands

display sftp client source

sftp ipv6

Use sftp ipv6 to connect an SFTP client to an IPv6 SFTP server and enter SFTP client view.

Syntax

In non-FIPS mode:

sftp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i interface-type interface-number ]

[ identity-key { dsa | rsa } | prefer-compress zlib | prefer-ctos-cipher { 3des | aes128 | aes256 | des }

| prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1

| dh-group14 } | prefer-stoc-cipher { 3des | aes128 | aes256 | des } | prefer-stoc-hmac { md5 |

md5-96 | sha1 | sha1-96 } ] * [ publickey keyname | source { interface interface-type interface-number

| ipv6 ipv6-address} ] *

In FIPS mode:

sftp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i interface-type interface-number ]

[ identity-key { dsa | rsa } | prefer-compress zlib | prefer-ctos-cipher { aes128 | aes256 } |

prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher { aes128 | aes256 }

| prefer-stoc-hmac { sha1 | sha1-96 } ] * [ publickey keyname | source { interface interface-type

interface-number | ipv6 ipv6-addres} ] *

Views

User view

Predefined user roles

network-admin

Parameters

server: Specifies a server by its IPv6 address or host name, a case-insensitive string of 1 to 46 characters.

port-number: Specifies a port number of the server, in the range of 1 to 65535. The default is 22.

vpn-instance vpn-instance-name: Specifies the MPLS L3VPN that the server belongs to, where the

vpn-instance-name argument is a case-sensitive string of 1 to 31 characters.

-i interface-type interface-number: Specifies the outgoing interface used by the client to connect to the

server. The argument interface-type interface-number specified the outgoing interface by its type and

259

HP 5920 User Manual

Other manuals for HP 5920