[Sysname-luser-manage-user1] service-type ftp
Related commands
display local-user
state (local user view)
Use state to set the status of a local user.
Use undo state to restore the default.
Syntax
state { active | block }
undo state
Default
A local user is in active state.
Views
Local user view
Predefined user roles
network-admin
Parameters
active: Places the local user in active state to allow the local user to request network services.
block: Places the local user in blocked state to prevent the local user from requesting network services.
Usage guidelines
This command only applies to the local user. It affects no other users.
Examples
# Place the device management user user1 to the blocked state.
<Sysname> system-view
[Sysname] local-user user1 class manage
[Sysname-luser-manage-user1] state block
Related commands
display local-user
user-group
Use user-group to create a user group and enter its view.
Use undo user-group to delete a user group.
Syntax
user-group group-name
32
To Next Page
Loading...
Need help?
General
