If you use the sftp ipv6 command to connect to an SFTP server and specify another source IPv6 address,
the SFTP client uses the new source IPv6 address for the current connection instead of that specified by
the sftp client ipv6 source command.
The source address specified by the sftp client ipv6 source command applies to all SFTP connections, but
the source address specifies by the sftp ipv6 command applies only to the current connection.
Examples
# Specify the source IPv6 address for the SFTP client as 2:2::2:2.
<Sysname> system-view
[Sysname] sftp client ipv6 source ipv6 2:2::2:2
Related commands
display sftp client source
sftp client source
Use sftp client source to specify the source IPv4 address or source interface for the SFTP client.
Use undo sftp client source to remove the configuration.
Syntax
sftp client source { interface interface-type interface-number | ip ip-address }
undo sftp client source
Default
The SFTP client uses the IPv4 address of the interface specified by the route of the device to access the
SFTP server.
Views
System view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies the primary IP address of the interface as the source
address. The interface-type interface-number argument specifies a source interface by its type and
number.
ip ip-address: Specifies a source IPv4 address.
Usage guidelines
The SFTP client uses the specified source interface and source IP address to communicate with the server.
If you execute the sftp client source command multiple times, the most recent configuration takes effect.
If you use the sftp command to connect to an SFTP server and specify another source IP address, the SFTP
client uses the new source IPv6 address for the current connection instead of that specified by the sftp
client source command.
258
To Next Page
Loading...
Need help?
General
