timer quiet (RADIUS scheme view)
Use timer quiet to set the quiet timer for the servers specified in an RADIUS scheme.
Use undo timer quiet to restore the default.
Syntax
timer quiet minutes
undo timer quiet
Default
The server quiet period is 5 minutes.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
minutes: Server quiet period in minutes, in the range of 1 to 255.
Usage guidelines
Be sure to set the server quiet timer properly. Too short a quiet timer may result in frequent authentication
or accounting failures because the device keeps trying to communicate with an unreachable server that
is in active state.
Examples
# Set the quiet timer for the servers to 10 minutes.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer quiet 10
Related commands
display radius scheme
timer realtime-accounting (RADIUS scheme view)
Use timer realtime-accounting to set the real-time accounting interval.
Use undo timer realtime-accounting to restore the default.
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
Default
The real-time accounting interval is 12 minutes.
56
To Next Page
Loading...
Need help?
General
