Related commands
• display pki certificate attribute-group
• rule
ca identifier
Use ca identifier to specify the trusted CA.
Use undo ca identifier to remove the trusted CA.
Syntax
ca identifier name
undo ca identifier
Default
No trusted CA is specified.
Views
PKI domain view
Predefined user roles
network-admin
Parameters
name: Specifies the name of the trusted CA, a case-sensitive string of 1 to 63 characters.
Usage guidelines
To obtain a CA certificate, you must specify the trusted CA name. The trusted CA name is contained in
SCEP messages and typically ignored by the CA server. The CA server does not use the trusted CA name
unless the server has two CAs configured with the same registration server.
When you use this command, make sure the specified CA name is consistent with the name of the CA
that owns the CA certificate to be obtained.
Examples
# Specify the trusted CA as new-ca.
<Sysname> system-view
[Sysname] pki domain aaa
[Sysname-pki-domain-aaa] ca identifier new-ca
certificate request entity
Use certificate request entity to specify the PKI entity for certificate request.
Use undo certificate request entity to remove the PKI entity for certificate request.
Syntax
certificate request entity entity-name
173
To Next Page
Loading...
Need help?
General
