Parameters
minutes: Real-time accounting interval in minutes, in the range of 0 to 60. Setting this interval to 0
disables the device from sending online user accounting information to the HWTACACS accounting
server.
Usage guidelines
For real-time accounting, a NAS must transmit the accounting information of online users to the
HWTACACS accounting server periodically. This command is used to set the interval.
Different real-time accounting intervals impose different performance requirements on the device and the
HWTACACS server. A shorter interval helps achieve higher accounting precision but requires higher
performance. Use a longer interval when there are a large number of users (1000 or more).
Table 8 Recommended real-time accounting intervals
Number of users
Real-time accountin
interval
1 to 99 3 minutes
100 to 499 6 minutes
500 to 999 12 minutes
1000 or more 15 minutes or longer
Examples
# Set the real-time accounting interval to 51 minutes for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer realtime-accounting 51
Related commands
display hwtacacs scheme
timer response-timeout (HWTACACS scheme view)
Use timer response-timeout to set the HWTACACS server response timeout timer.
Use undo timer response-timeout to restore the default.
Syntax
timer response-timeout seconds
undo timer response-timeout
Default
The HWTACACS server response timeout time is 5 seconds.
Views
HWTACACS scheme view
78
To Next Page
Loading...
Need help?
General
