Syntax
arp source-mac threshold threshold-value
undo arp source-mac threshold
Default
The threshold for source MAC address based ARP attack detection is 30.
Views
System view
Predefined user roles
network-admin
Parameters
threshold-value: Specifies the threshold for source MAC address based ARP attack detection, in the
range of 1 to 5000.
Examples
# Configure the threshold for source MAC address based ARP attack detection as 30.
<Sysname> system-view
[Sysname] arp source-mac threshold 30
display arp source-mac
Use display arp source-mac to display ARP attack entries detected by source MAC address based ARP
attack detection.
Syntax
display arp source-mac { slot slot-number | interface interface-type interface-number }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays ARP attack entries detected on the specified
interface.
slot slot-number: Displays ARP attack entries detected on an IRF member device. The slot-number
argument specifies the ID of the IRF member device.
Usage guidelines
If you do not specify any interface, the display arp source-mac command displays ARP attack entries
detected on all the interfaces.
296
To Next Page
Loading...
Need help?
General
