State: Active
Service Type: SSH/Telnet/Terminal
User Group: system
Bind Attributes:
Authorization Attributes:
Work Directory: flash:
User Role List: network-admin
Network access user jj:
State: Active
Service Type: Lan-access
User Group: system
Bind Attributes:
IP Address: 2.2.2.2
Location Bound: 3/3/2 (slot/subslot/port)
MAC Address: 0001-0001-0001
VLAN ID: 2
Authorization Attributes:
Idle TimeOut: 33 (min)
Work Directory: flash:
ACL Number: 2000
User Role List: network-operator, level-0, level-3
Table 2 Command output
Field Descri
tion
State Status of the local user: active or blocked.
Service Type
Service types that the local user can use, including FTP, LAN access, SSH, Telnet,
and terminal.
User Group Group to which the local user belongs.
Bind attributes Binding attributes of the local user.
Authorization attributes Authorization attributes of the local user.
Idle TimeOut Idle timeout period of the user, in minutes.
Work Directory Directory that the FTP, SFTP, or SCP user can access.
ACL Number Authorization ACL of the local user.
VLAN ID Authorized VLAN of the local user.
User Role List Authorized roles of the local user.
display user-group
Use display user-group to display the user group configuration.
Syntax
display user-group [ group-name ]
26
To Next Page
Loading...
Need help?
General
