Examples
# In HWTACACS scheme hwt1, set the data flow and packet measurement units for traffic statistics to
kilobyte and kilo-packet, respectively.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] data-flow-format data kilo-byte packet kilo-packet
Related commands
display hwtacacs scheme
display hwtacacs scheme
Use display hwtacacs scheme to display the configuration or statistics of HWTACACS schemes.
Syntax
display hwtacacs scheme [ hwtacacs-scheme-name [ statistics ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a case-insensitive string of 1 to
32 characters.
statistics: Displays the HWTACACS service statistics. If this option is not specified, the command displays
the configuration of the HWTACACS scheme.
Usage guidelines
If no HWTACACS scheme name is specified, the command displays the configuration of all HWTACACS
schemes.
Examples
# Displays the configuration of all HWTACACS schemes.
<Sysname> display hwtacacs scheme
Total 1 TACACS schemes
------------------------------------------------------------------
HWTACACS Scheme Name : hwtac
Index : 0
Primary Auth Server:
IP : 2.2.2.2 Port: 49 State: Active
VPN Instance: 2
Primary Author Server:
IP : 2.2.2.2 Port: 49 State: Active
61
To Next Page
Loading...
Need help?
General
