Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
minutes: Real-time accounting interval in minutes, in the range of 0 to 60.
Usage guidelines
When the real-time accounting interval configured on the device is not zero, the device sends online user
accounting information to the RADIUS accounting server at the configured interval. When the real-time
accounting interval on the device is zero, the device sends online user accounting information to the
RADIUS accounting server at the real-time accounting interval configured on the server (if any) or does
not send online user accounting information.
Different real-time accounting intervals impose different performance requirements on the device and the
RADIUS server. A shorter interval helps achieve higher accounting precision but requires higher
performance. Use a longer interval when there are a large number of users (1000 or more).
Table 6 Recommended real-time accounting intervals
Number of users
Real-time accountin
interval
1 to 99 3 minutes
100 to 499 6 minutes
500 to 999 12 minutes
1000 or more 15 minutes or longer
Examples
# Set the real-time accounting interval to 51 minutes for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer realtime-accounting 51
Related commands
retry realtime-accounting
timer response-timeout (RADIUS scheme view)
Use timer response-timeout to set the RADIUS server response timeout timer.
Use undo timer response-timeout to restore the default.
Syntax
timer response-timeout seconds
undo timer response-timeout
57
To Next Page
Loading...
Need help?
General
