Parameters
interval: Specifies the minimum password update interval in hours, in the range of 0 to 168. 0 means no
requirements for password update interval.
Usage guidelines
The set minimum interval is not effective on a user who is prompted to change the password at the first
login or after the password expires.
Examples
# Set the minimum password update interval to 36 hours.
<Sysname> system-view
[Sysname] password-control update-interval 36
Related commands
display password-control
reset password-control blacklist
Use reset password-control blacklist to remove a specified user or all users from the password control
blacklist.
Syntax
reset password-control blacklist [ user-name name ]
Views
User view
Predefined user roles
network-admin
Parameters
user-name name: Specifies the user to be removed from the password control blacklist. The name
argument is the username, a case-sensitive string of 1 to 55 characters.
Usage guidelines
For a user blacklisted due to excessive login attempts, you can use this command to remove the user from
the password control blacklist and allow the user to log in again.
Examples
# Remove the user named test from the password control blacklist.
<Sysname> reset password-control blacklist user-name test
Are you sure to delete the specified user in blacklist? [Y/N]:
Related commands
display password-control blacklist
151
To Next Page
Loading...
Need help?
General
