specify a public key algorithm (by using the identity-key keyword) in order to get the correct data for the
local private key.
Examples
# Connect an SFTP client to the IPv4 SFTP server (10.1.1.2) and specify the public key of the server as
svkey. The SFTP client uses publickey authentication. Use the following algorithms:
• The preferred key exchange algorithm is dh-group14.
• The preferred server-to-client encryption algorithm is aes128.
• The preferred client-to-server HMAC algorithm is sha1.
• The preferred server-to-client HMAC algorithm is sha1-96.
• The preferred compression algorithm between the server and client is zlib.
<Sysname> sftp 10.1.1.2 prefer-kex dh-group14 prefer-stoc-cipher aes128 prefer-ctos-hmac
sha1 prefer-stoc-hmac sha1-96 prefer-compress zlib publickey svkey
sftp client ipv6 source
Use sftp client ipv6 source to specify the source IPv6 address or source interface for the SFTP client.
Use undo sftp client ipv6 source to remove the configuration.
Syntax
sftp client ipv6 source { interface interface-type interface-number | ipv6 ipv6-address }
undo sftp client ipv6 source
Default
The SFTP client uses the IPv6 address of the interface specified by the route of the device to access the
SFTP server.
Views
System view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies the IPv6 address of the interface which matches the
destination address of the outbound packets using the longest match criteria as the source IPv6 address.
The interface-type interface-number argument specifies a source interface by its type and number.
ipv6 ipv6-address: Specifies a source IPv6 address.
Usage guidelines
The SFTP client uses the specified source IPv6 address to communicate with the server.
If you execute the sftp client ipv6 source command multiple times, the most recent configuration takes
effect.
257
To Next Page
Loading...
Need help?
General
