example, the authentication default radius-scheme radius-scheme-name local none command specifies
a primary default RADIUS authentication method and two backup authentication methods, local
authentication and no authentication. With this command, the device performs RADIUS authentication
by default, performs local authentication when the RADIUS server is invalid, and does not perform
authentication when both of the previous methods are invalid.
Examples
# Configure the default authentication method for ISP domain test to use RADIUS scheme rd and use
local authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication default radius-scheme rd local
Related commands
• hwtacacs scheme
• ldap scheme
• local-user
• radius scheme
authentication lan-access
Use authentication lan-access to configure the authentication method for LAN users.
Use undo authentication lan-access to restore the default.
Syntax
In non-FIPS mode:
authentication lan-access { local [ none ] | none | radius-scheme radius-scheme-name [ local ] [ none ] }
undo authentication lan-access
In FIPS mode:
authentication lan-access { local | radius-scheme radius-scheme-name [ local ] }
undo authentication lan-access
Default
The default authentication method for the ISP domain is used for LAN users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
local: Performs local authentication.
8
To Next Page
Loading...
Need help?
General
