Parameters
keep-original: Sends the username to the RADIUS server as it is entered.
with-domain: Includes the ISP domain name in the username sent to the RADIUS server.
without-domain: Excludes the ISP domain name from the username sent to the RADIUS server.
Usage guidelines
A username is generally in the format userid@isp-name, of which isp-name is used by the device to
determine the ISP domain to which a user belongs. Some earlier RADIUS servers, however, cannot
recognize a username containing an ISP domain name. Before sending a username including a domain
name to such a RADIUS server, the device must remove the domain name. This command allows you to
specify whether to include a domain name in a username sent to a RADIUS server.
If a RADIUS scheme defines that the username is sent without the ISP domain name, do not apply the
RADIUS scheme to more than one ISP domain. The RADIUS server regards two users in different ISP
domains but with the same userid as one.
Examples
# Configure the device to remove the domain name from the username sent to the RADIUS servers
specified in RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] user-name-format without-domain
Related commands
display radius scheme
vpn-instance (RADIUS scheme view)
Use vpn-instance to specify a VPN for a RADIUS scheme.
Use undo vpn-instance to remove the configuration.
Syntax
vpn-instance vpn-instance-name
undo vpn-instance
Default
The RADIUS scheme belongs to the public network.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
vpn-instance-name: Name of the MPLS L3VPN, a case-sensitive string of 1 to 31 characters.
59
To Next Page
Loading...
Need help?
General
