HP 5920 User Manual

Parameters
isp-name: ISP domain name, a case-insensitive string of 1 to 24 characters that cannot contain slash (/),
back slash (\), vertical bar (|), quotation marks ("), colon (:), asterisk (*), question mark (?), left angle
bracket (<), right angle bracket (>), or at sign (@).
Usage guidelines
All ISP domains are in active state when they are created.
You cannot delete the system predefined ISP domain system, and can only modify its configuration.
To delete the ISP domain that is used as the default ISP domain, you must change it to a non-default ISP
domain first by using the undo domain default enable command.
Examples
# Create ISP domain test and enter its view.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test]
Related commands
• display domain
• domain default enable
• state (ISP domain view)
domain default enable
Use domain default enable to specify the default ISP domain. Users without any domain name carried in
the usernames are considered in the default domain.
Use undo domain default enable to restore the default.
Syntax
domain default enable isp-name
undo domain default enable
Default
The default ISP domain is the system predefined ISP domain system.
Views
System view
Predefined user roles
network-admin
Parameters
isp-name: ISP domain name, a case-insensitive string of 1 to 24 characters.
20

HP 5920 Specifications

General

Brand	HP
Model	5920
Category	Switch
Language	English