Syntax
inside-vpn vpn-instance vpn-name
undo inside-vpn
Default
No inside VPN instance is specified for an IKE profile, and the device forwards protected data to the
VPN instance with the same name as the VPN instance on the external network.
Views
IKE profile view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-name: Specifies the MPLS L3VPN to which the device forwards protected data. The
vpn-name argument is a case-sensitive string of 1 to 31 characters.
Usage guidelines
This command determines where the device should forward received IPsec protected data. If you
configure this command, the device looks for a route in the specified VPN to forward the data. Otherwise,
the device looks for a route in the same VPN instance as that on the external network and forwards the
data to the VPN instance.
Examples
# Set the inside VPN instance to vpn1 for IKE profile prof1.
<Sysname> system-view
[Sysname] ike profile prof1
[Sysname-ike-profile-prof1] inside-vpn vpn-instance vpn1
keychain
Use keychain to specify an IKE keychain for pre-shared key authentication.
Use undo keychain to remove the IKE keychain reference.
Syntax
keychain keychain-name
undo keychain keychain-name
Default
No IKE keychain is specified for an IKE profile.
Views
IKE profile view
Predefined user roles
network-admin
387
To Next Page
Loading...
Need help?
General
