primary accounting (HWTACACS scheme view)
Use primary accounting to specify the primary HWTACACS accounting server.
Use undo primary accounting to remove the configuration.
Syntax
primary accounting { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple } string
| vpn-instance vpn-instance-name ] *
undo primary accounting
Default
No primary HWTACACS accounting server is specified.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies an IPv4 address of the primary HWTACACS accounting server.
ipv6 ipv6-address: Specifies an IPv6 address of the primary HWTACACS accounting server.
port-number: Specifies the service port number of the primary HWTACACS accounting server, a TCP
port number in the range of 1 to 65535. The default setting is 49.
key { cipher | simple } string: Sets the shared key for secure communication with the primary
HWTACACS accounting server.
• cipher string: Sets a ciphertext shared key. The string argument is case sensitive. In non-FIPS mode,
the key is a string of 1 to 373 characters. In FIPS mode, the key is a string of 15 to 373 characters.
• simple string: Sets a plaintext shared key. The string argument is case sensitive. In non-FIPS mode,
the key is a string of 1 to 255 characters. In FIPS mode, the key is a string of 15 to 255 characters
and must contain numbers, uppercase letters, lowercase letters, and special characters.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the primary HWTACACS
accounting server belongs, where vpn-instance-name is a case-sensitive string of 1 to 31 characters. If
the server is on the public network, do not specify this option.
Usage guidelines
Make sure that the port number and shared key settings of the primary HWTACACS accounting server
are the same as those configured on the server.
Two accounting servers specified for a scheme, primary or secondary, cannot have identical IP address,
port number, and VPN settings.
67
To Next Page
Loading...
Need help?
General
