Parameters
interface interface-type interface-number: Specifies the IPv6 address of the interface which matches the
destination address of the outbound packets using the longest match criteria as the source IPv6 address.
The interface-type interface-number argument specifies a source interface by its type and number.
ipv6 ipv6-address: Specifies a source IPv6 address.
Usage guidelines
The Stelnet client uses the specified source address to communicate with the server.
If you execute the ssh client ipv6 source command multiple times, the most recent configuration takes
effect.
If you use the ssh2 ipv6 command to connect to an Stelnet server and specify another source IPv6
address, the Stelnet client uses the new source IPv6 address for the current connection instead of that
specified by the ssh client ipv6 source command.
The source address specified by the ssh client ipv6 source command applies to all Stelnet connections,
and the source address specifies by the ssh2 ipv6 command applies only to the current connection.
Examples
# Specify the source IPv6 address as 2:2::2:2 for the Stelnet client.
<Sysname> system-view
[Sysname] ssh client ipv6 source ipv6 2:2::2:2
Related commands
display ssh client source
ssh client source
Use ssh client source to specify the source IPv4 address or source interface for the Stelnet client.
Use undo ssh client source to remove the configuration.
Syntax
ssh client source { interface interface-type interface-number | ip ip-address }
undo ssh client source
Default
The Stelnet client uses the IPv4 address of the interface specified by the route of the device to access the
Stelnet server.
Views
System view
Predefined user roles
network-admin
262
To Next Page
Loading...
Need help?
General
