Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-name: Specifies a user group by its name, a case-insensitive string of 1 to 32 characters.
Usage guidelines
If no user group name is specified, the command displays the configuration of all user groups.
Examples
# Display the configuration of all user groups.
<Sysname> display user-group
Total 2 user groups matched.
The contents of user group system:
Authorization Attributes:
Work Directory: flash:
The contents of user group jj:
Authorization Attributes:
Idle TimeOut: 2 (min)
Work Directory: flash:/
ACL Number: 2000
VLAN ID: 2
Table 3 Command output
Field Descri
tion
Idle TimeOut Idle timeout period, in minutes.
Work Directory Directory that FTP/SFTP/SCP users in the group can access.
ACL Number Authorization ACL.
VLAN ID Authorized VLAN.
group
Use group to assign a local user to a user group.
Use undo group to restore the default.
Syntax
group group-name
undo group
27
To Next Page
Loading...
Need help?
General
