HP 5920 User Manual

Examples
# Specify the IP address and port number of the LDAP authentication server as 192.168.0.10.
<Sysname> system-view
[Sysname] ldap server ccc
[Sysname-ldap-server-ccc] ip 192.168.0.10 port 4300
Related commands
ldap server
ldap scheme
Use ldap scheme to create an LDAP scheme and enter its view.
Use undo ldap scheme to delete an LDAP scheme.
Syntax
ldap scheme ldap-scheme-name
undo ldap scheme ldap-scheme-name
Default
No LDAP scheme is defined.
Views
System view
Predefined user roles
network-admin
Parameters
ldap-scheme-name: LDAP scheme name, a case-insensitive string of 1 to 32 characters.
Usage guidelines
An LDAP scheme can be referenced by more than one ISP domain at the same time.
You can configure up to 16 LDAP schemes.
Examples
# Create an LDAP scheme named ldap1 and enter its view.
<Sysname> system-view
[Sysname] ldap scheme ldap1
[Sysname-ldap-ldap1]
Related commands
display ldap scheme
ldap server
Use ldap server to create an LDAP server and enter its view.
85

HP 5920 Specifications

General

Brand	HP
Model	5920
Category	Switch
Language	English